Maximum length of an e-mail address is 55 characters.īy means of the SNMPv1 protocol it is possible to find currently measured values and parameters concerning alarms. When temperature alarm limits are exceeded, an e-mail message is sent to addresses defined by the user (maximum three addresses). It is possible export history to CSV file (comma or dot decimal separator) for import to Excel. If all values are over upper (lower) limit, the alarm line will be in the bottom (top) graph part displayed.
Upper (lower) alarm value is in graph displayed as red (blue) line. Measured value is in graph displayed by green colour, error or not yet measured values are displayed as grey broken line. The alarm state may be read via the device The P8611 has a built-in web server showing current temperature values, alarm limits alarm state and recorded history in both tabular and chart formats. to display an alarm state on the device www pageĪlarm limits may be set via the supplied TSensor program, Modbus or Telnet protocols.to send a SNMP trap to maximum of three IP addresses.to send an e-mail to maximum of three e-mail addresses.There are the following possible ways to deliver the warning report: The instrument may send a warning message to several defined points if the measured value gets out of adjusted limits. It is possible to read values from PC through the Ethernet connection. The P8611 is designed for measurement of temperature in ☌ or ☏. Dimensions: 88 x 126 x 39,5 mm (W x H x D).Power over Ethernet according to IEEE 802.3af or 5V (optional).
#WIRED SERVER ROOM THERMOMETER WITH ALARM SOFTWARE#
Modbus TCP protocol for communication with SCADA software such as DAQFactory and LabVIEW.1000 sample memory history - can export to Excel file.Web browser interface showing real time temperature and history chart.1 external temperature/humidity sensors with 1m leads (using optional DSRH01).1 external temperature sensors with 2m, 5m and 10m cable lengths (not included).
0 kommentar(er)
